Nhà
Sản phẩm
Về chúng tôi
Tham quan nhà máy
Kiểm soát chất lượng
Liên hệ chúng tôi
Yêu cầu báo giá
Nhà Sản phẩmWafer Connector

1.50mm Pitch ZH SMT Connector Side Entry Type Shrouded Header Right Angle Connector

1.50mm Pitch ZH SMT Connector Side Entry Type Shrouded Header Right Angle Connector

    • 1.50mm Pitch ZH SMT Connector Side Entry Type Shrouded Header Right Angle Connector
    • 1.50mm Pitch ZH SMT Connector Side Entry Type Shrouded Header Right Angle Connector
    • 1.50mm Pitch ZH SMT Connector Side Entry Type Shrouded Header Right Angle Connector
    • 1.50mm Pitch ZH SMT Connector Side Entry Type Shrouded Header Right Angle Connector
  • 1.50mm Pitch ZH SMT Connector Side Entry Type Shrouded Header Right Angle Connector

    Thông tin chi tiết sản phẩm:

    Place of Origin: Dongguan, China(mainland)
    Hàng hiệu: HRT
    Chứng nhận: ISO9001/ ISO14001/UL/RoHS/REACH
    Model Number: A1500WR-S-NP

    Thanh toán:

    Minimum Order Quantity: 5000 pcs
    Giá bán: Negotiated
    Packaging Details: Bag with outside carton
    Delivery Time: 5 to 8 working days after payment checked
    Payment Terms: TT, Western Union, PayPal, L/C
    Supply Ability: 28 million pcs per month
    Liên hệ với bây giờ
    Chi tiết sản phẩm
    Category: Wafer connector Application: Signal, Wire-to-Board
    Material: PA9T Flammability: UL94V-0
    Wire range: AWG26# to 32# Gender: male housing

    1.25mm Pitch Circuit Board Wire Connectors With Lock Structure PA66 / LCP Material

     

    1, The specification of the product including basic size information, electrical and mechanical properties.

     

    Basic size information
    Suitable terminals A1500T series 
    Suitable wafer A1500H series housing
    Pitch 1.50mm
    Color beige
    Row single
    Lock to mating part without
    Circuits 2 to 14
    Wire insulation diameter  1.15mm Max.
    Terminal materials phosphor bronze, tin-plated
     
                                                         Electrical properties
    Current Rating 1A AC, DC
    Voltage Rating 125V AC, DC
    Contact Resistance 20mΩ Max
    Insulation Resistance 100mΩ min
    Withstanding Voltage 500V AC/minute
     
                                                          Mechanical properties
    Temperature range -25℃ to 85 ℃
             Other information please kindly check the following picture.

     

    2, Related drawing and report

    Folllowing pictures are out testing report and exact engineering drawing for your information, please kindly check it, wish it can help you to get what you really need.

     

    1.50mm Pitch ZH SMT Connector Side Entry Type Shrouded Header Right Angle Connector

     

    1.50mm Pitch ZH SMT Connector Side Entry Type Shrouded Header Right Angle Connector

    1.50mm Pitch ZH SMT Connector Side Entry Type Shrouded Header Right Angle Connector

     

    This document is the property of Xin Pei Enterprise and delivered on the express condition that it is not be disclosed, reproduced or used, in whole or in part, for manufacture or sale by anyone other than Xin Pei Enterprise.

    Without its prior consent, and that no right is granted to disclose or to use any information in this document.

     

    1. Scope

    This specification covers the requirements for product performance of 1.50mm pitch wire to board

    connectors series.

     

     

    2. Construction,Dimensions,Material & Plating

    See the attached drawings

     

     

    3. Ratings & Applicable Wires

     

    Item Standard
    Rated Voltage (Max.) 100V AC/DC Insulation O.D. 1.10mm (Max.)
    Rated Current (Max.) And Applicable Wires AWG#26 1A AC/DC
    AWG#28 1A AC/DC
    AWG#30 1A AC/DC
    AWG#32 0.8A AC/DC
    Ambient Temperature Range -25℃ ~ +85℃*

    *: Including terminal temperature rise

     

     

    4. Electrical Performance

     

    Test Description Procedure Requirement
    4-1

     

    Contact Resistance

     

    Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4) 20mΩ (Max.)
    4-2 Insulation Resistance Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) 500MΩ (Min.)
    4-3 Dielectric Withstanding Voltage Mate connectors, apply 500V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301) No Breakdown.
    4-4 Contact Resistance on Crimped Portion Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA. 5mΩ (Max.)

     

     

    5. Mechanical Performance

     

    Test Description Procedure Requirement
    5-1 Actuator Insertion & Withdrawal Force Insert and withdraw connectors at the speed rate of 25±3mm / minute. Refer to paragraph 7
    5-2 Crimping Pull Out Force Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) AWG#26 2.0kgf (Min)
    AWG#28 1.0kgf (Min)
    AWG#30 0.8kgf (Min)
    AWG#32 0.5kgf (Min)
    5-3 Terminal Insertion Force. Insert the crimped terminal into the housing. 1.00kgf (Max.)
    5-4 Terminal/Housing Retention Force. Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. 1.00kgf (Min.)
    5-5 Pin Retention Force Apply axial push force at the speed rate of 25±3mm / minute 0.70kgf (Min.)
    5-6 Durability When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. Contact Resistance 40mΩ (Max.)
    5-7 Vibration

    Amplitude: 1.5mm P-P

    Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

    (Based upon MIL-STD-202 Method 201A)

    Appearance No Damage.

    Contact Resistance 40mΩ (Max.)

    Discontinuity 1 μsec.(Max.)

    5-8 Physical Shock 490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

     

     

    6. Environmental Performance And Others

     

    Test Description Procedure Requirement
    6-1 Temperature Rise Carrying rated current load.(Based upon UL 498) 30℃(Max.)
    6-2 Heat Resistance 85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

    Appearance No Damage.

    Contact Resistance 40mΩ (Max.)

    6-3 Cold Resistance -25±3℃,96 hours (Based upon JIS C0020)
    6-4 Humidity

    Temperature: 40±2℃

    Relative Humidity : 90~95%

    Duration: 96 hours

    (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

    Appearance No Damage.

    Contact Resistance 40mΩ (Max.)

    Insulation Resistance 50MΩ (Min.)

    Dielectric Withstanding Voltage Must meet 4-3

    6-5 Temperature Cycling

    5 cycles of:

    a) -55℃ 30 minutes

    b) +85℃ 30 minutes

    (Based upon JIS C0025)

    Appearance No Damage.

    Contact Resistance 40mΩ (Max.)

    6-6 Salt Spray Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B)
    6-7 SO2 Gas

    24 hours exposure to 50±5ppm.

    SO2 gas at 40±2℃.

    6-8 NH3 Gas 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.

     

    6-9 Solderability

    Soldering Time: 5±0.5 sec.

    Solder Temperature: 245±5℃

    Solder Wetting 95% of immersed area must show no voids, pin holes
    6-10

    Resistance to Soldering Heat

    (DIP)

    Solder pot method

    Soldering time: 10±0.5 sec.

    Solder Temperature: 260±5℃

    Solder iron method

    Soldering Time: 5±0.5 sec.

    Solder Temperature: 370℃ ~ 400℃

    Appearance No Damage.
    6-11 Resistance to Soldering Heat (SMT)

    When reflowing

    Refer to paragraph 8

    Solder iron method

    Soldering Time: 5±0.5 sec.

    Solder Temperature: 370℃ ~ 400℃

    Appearance No Damage.

     

    7. Actuator Insertion/Withdrawal Force

    [Unit : kgf]

    Circuits At Initial
    Insertion (Max.) Withdrawal (Min.)
    Single 0.70 0.06
    02 2.50 0.40
    03 3.00 0.50
    04 3.50 0.60
    05 4.00 0.70
    06 4.50 0.80
    07 5.00 0.80
    08 5.50 0.90
    09 6.00 0.90
    10 6.50 1.00
    11 7.00 1.00
    12 7.50 1.20
    13 8.00 1.20

     

     


    3, HRT main product show

    You can get more series parts from the below picture, it's our main product picture from our different type.

     

        1.50mm Pitch ZH SMT Connector Side Entry Type Shrouded Header Right Angle Connector

    Chi tiết liên lạc
    Dongguan Xinpei Plastic & Metal Electronic Co. Ltd

    Người liên hệ: Barry Fu

    Tel: +8618126033127

    Gửi yêu cầu thông tin của bạn trực tiếp cho chúng tôi (0 / 3000)

    Sản phẩm khác