Dual Row 1.00mm Pitch Wire To Board Connectors A1003H Wire Housing With Lock

Thông tin chi tiết sản phẩm:

Place of Origin:	Dongguan, China(mainland)
Hàng hiệu:	HRT
Chứng nhận:	ISO9001/ ISO14001/UL/RoHS/REACH
Model Number:	A1003H-2XNP

Thanh toán:

Minimum Order Quantity:	5000 pcs
Giá bán:	USD0.001 to 0.005 per pcs
Packaging Details:	Tube(pipe) with outside paper carton
Delivery Time:	5 to 8 working days after payment checked
Payment Terms:	TT, Western Union, PayPal, L/C
Supply Ability:	28 million pcs per month

Liên hệ với bây giờ

Chi tiết sản phẩm

Color:	White	Pitch:	1.0mm
Wafer materials:	Nylon66, UL94V-0	Wire range:	AWG32# to 28#
Packaging Type:	Bags	Suitable wafer:	A1003 series dual row
Điểm nổi bật:	Connector Wire To Board , Pcb To Wire Connectors

1, Detailed specification of product:

1. Basic information:

Color: White
Housing Material: Nylon66
Flammability: 94V-0
Pitch: 1.00mm
Circuits: 16 20 30 32 40 50positions
Insulation O.D.: 0.80mm
Mounting type: wire to board
Application: Signal, wire to board
Terminal materials: Phosphor bronze
Finish terminal: gold-flash type
Terminal Package: 15K pcs/reel
Suitable terminal: A1003 series
Terminal processing method: E-stamping before tin-plated

2. Electrical characteristic:

Current Rating: 1A AC DC
Voltage Rating: 50V AC, DC
Contact Resistance: 20mΩ Max
Insulation Resistance: 100mΩ
Withstanding Voltage: 250V AC/minute

3. Mechanical characteristic:

Temperature Range:-25°C ~+85°C
Terminal Insertion Force: 0.50kgf (Max.)
Terminal/Housing Retention Force: 0.50kgf (Min.)
Pin Retention Force: 0.30kgf (Min.)

Other detailed data please check the pictures as below.

2, Introduction for this series products

Please kindly notice these series product, you can buy it as a set, then we will offer you reasonable price.

A1003 series product
Terminal	A1003-T

Housing	Dual housing	A1003H-2XNP
	Single housing	A1003H-NP

Wafer	Dual rows type	A1003WV-S-2XNP & A1003WVA-S-2XNP

3, Corresponding engineering drawing & test report
Below file is our engineering drawing and testing report for further information. It's sure that it will be a
good reference for you to know this series parts clearly.

Drawing of dimension
Dual Row 1.00mm Pitch Wire To Board Connectors A1003H Wire Housing With Lock

Test report

3. Ratings & Applicable Wires

Item	Standard
Rated Voltage (Max.)	50V AC/DC		Insulation O.D. 0.80mm (Max.)
Rated Current (Max.) And Applicable Wires	AWG#28	1A AC/DC
	AWG#30	1A AC/DC
	AWG#32	0.8A AC/DC
Ambient Temperature Range	-25℃ ~ +85℃*

*: Including terminal temperature rise

4. Electrical Performance

Test Description		Procedure	Requirement
4-1	Contact Resistance	Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4)	20mΩ (Max.)
4-2	Insulation Resistance	Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)	100MΩ (Min.)
4-3	Dielectric Withstanding Voltage	Mate connectors, apply 250V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301)	No Breakdown.
4-4	Contact Resistance on Crimped Portion	Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA.	5mΩ (Max.)

5. Mechanical Performance

Test Description		Procedure	Requirement
5-1	Actuator Insertion & Withdrawal Force	Insert and withdraw connectors at the speed rate of 25±3mm / minute.	Refer to paragraph 7
5-2	Crimping Pull Out Force	Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)	AWG#28	1.0kgf (Min)
			AWG#30	0.5kgf (Min)
			AWG#32	0.3kgf (Min)
5-3	Terminal Insertion Force.	Insert the crimped terminal into the housing.	0.50kgf (Max.)
5-4	Terminal/Housing Retention Force.	Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.	0.50kgf (Min.)
5-5	Pin Retention Force	Apply axial push force at the speed rate of 25±3mm / minute	0.30kgf (Min.)
5-6	Durability	When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.	Contact Resistance 40mΩ (Max.)
5-7	Vibration	Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A)	Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.)
5-8	Physical Shock	490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

4, FAQ
Q1: Are you manufacturer or trading company?
A: We are a manufacturer with 12 years experience professional manufacturing company which specializes in producing, research and development, sales of variety of electronic connectors, terminals, wafer etc.
Q2: How to control the quality of your products?
A: Quality is life of our company. The QC staff control each procedure as per ISO9001 program. All part are100% tested before shipping.
Q3: Where is your factory located, and how can we visit there?
A: Our company is located in Dongguan city, Guangdong Province, China. It is close to shenzhen
Q4: How can I get the sample?
A: The sample is for free,but the transportation fee will be beared by customers.

Q5: What are your products applied to?
A: Our products are applied to automotive use, conmmunication equipment, industrial use, household appliance, electronics, etc.

5, The application of this series product
Please kindly check the below picture, you can know its' applicated range directly. Our products are mainly used in wire to wire connecting, power, Inside of some machines and some appliances, or power of PCB board. By the way, all of this series prodcut are complied with REACH, UL, RoHS srandard. In order to protect the evironment furthur, some parts are halogen free.
Dual Row 1.00mm Pitch Wire To Board Connectors A1003H Wire Housing With Lock